Neptune Systems Trident Marine Aquarium Analyzer

The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with the DOS (available separately) it creates a fully automated system for the proper dosing of supplements, maintaining them at consistent levels.

Automatically tests seawater for Alkalinity, Calcium, and Magnesium

Up to 24 Alkalinity tests per day with +/-.05 dKh precision

Up to 12 Calcium tests per day with +/-15 ppm precision

Up to 12 Magnesium tests per day with +/-15 ppm precision

7.9ml sample water used per parameter tested

7 minutes testing time per parameter tested

Up to one month of testing before reagents need changing based on base level testing of 4-Alk, 2-Ca, 2-Mg per day.

When combined with DOS system (available seperately), the data from Trident can be used to automatically raise or lower the amount of additives dosed as necessary to maintain stability at user set point.

Wide range for measurements:

Alkalinity 5.0 - 15.0 dKH
Calcium 250 - 875 ppm
Magnesium 850 - 1950 ppm

Requires

Apex or ApexEL (not Apex Classic, Lite, or Jr.)

Available 1Link port OR 24v power supply and Aquabus Cable (available separately)

External waste container or drain

Must be located within 4’ of water source to be tested

Specifications

Alkalinity Precision - +/-.05 dKh
Calcium Precision - +/-15 ppm
Magnesium Precision - +/-15 ppm
Testing Time - Around 7 minutes per test
Sample Water Required - Around 8mL per test
Max Head - Must be less than 4' from the water sample

Includes

Trident

1 Link cable

5' of black sample line tubing

5' of clear waste line tubing

1-month reagent supply

Calibration Fluid

Get Started Card

Neptune-Systems